護目鏡安全標準 ANSI Z87
護目鏡安全標準 ANSI Z87
重量500克,127公分落下
ANSI
Z87.1 test procedure describes the criteria for safety eyewear to
protect the eyes and face from impact injuries. This standard covers
all types of protector configurations including eye glasses, safety
goggles, face shields, welding goggles, welding masks and more. ANSI
Z87.1 was created to protect eyewear users from hazards such as
impact, optical radiation, liquid splash, dust and fine particles.
TestResources offers mechanical testing equipment to address most of
the impact tests specified in ANSI Z87.1l including Test 5.2.1 Drop
Ball Impact Resistance, Test 6.2.2 High Mass Impact Test, Test 9.6
Drop Ball Test, and Test 9.11 High Mass Impact Test.
Equipment Required
High
Mass Impact Test
A TestResources Pointed Projectile Test Machine which drops a special
weighted and pointed projectile, weighing 500grams (17.6 oz). The test machine has an adjustable dropping height for the recommended 127 cm (50 inch) drop. This is useful to adjust for future testing needs as well. The projectile is guided precisely within a plastic tube.
A TestResources Pointed Projectile Test Machine which drops a special
weighted and pointed projectile, weighing 500grams (17.6 oz). The test machine has an adjustable dropping height for the recommended 127 cm (50 inch) drop. This is useful to adjust for future testing needs as well. The projectile is guided precisely within a plastic tube.
Drop
Ball Impact Test
This test can be performed with the same Drop Test machine at the recommended test height of 127 cm (50 inch). The fixture suspends the ASNI Z87.1 1 inch (25.4mm) diameter steel ball with a magnetic hold, released with a touch of a button.
This test can be performed with the same Drop Test machine at the recommended test height of 127 cm (50 inch). The fixture suspends the ASNI Z87.1 1 inch (25.4mm) diameter steel ball with a magnetic hold, released with a touch of a button.
TestResources
engineers can also configure test equipment and fixtures for other
tests required from ANSI Z87.1 including High Velocity Impact and
Penetration Test. TestResources can also provide the ANSI/ISEA
certified headform specified in Annex B of ANSI Z87.1. . By means of
our testing expertise and modular product design, we will help find
the solution that is right for you. Give our test engineers a call
today for help configuring the best test machine and accessories
according to your standard.
資料來源:
0 意見:
張貼留言